1. Product introduction

A post driver (also called a post pounder, post rammer or T-post driver) is a heavy-duty steel tube with side handles that slides over a fence post and is lifted and dropped to hammer it into the ground. It replaces a sledgehammer, driving posts straight, fast and with far less effort. Powder-coated or galvanized finish resists rust for years of outdoor use.

2. Applications

Fencing: T-posts, U-posts, Y-star pickets, wood, metal and chain-link fence posts. Agriculture: farm fencing, vineyard and orchard trellis posts, livestock enclosures. Landscaping & construction: sign posts, mailbox posts, ground anchors, stakes, temporary structures.

3. Specifications

• Internal diameter: 60 / 75 / 89 / 102 / 121 / 152 mm (2.4″ – 6″)
• Length: 600 / 800 / 950 mm (23″ – 37″)
• Weight: 7.5 – 15.8 kg (12 – 34 lbs)
• Material: Q235 steel · 10 gauge industrial steel
• Finish: powder-coated (red / black / grey / green) · galvanized
• Handle: dual tapered handles · integrated steel handles

4. Key features

• — Heavy all-steel construction for maximum impact force.
• — Dual tapered handles for a comfortable, secure grip.
• — Drives posts straight and fast, far less effort than a hammer.
• — Powder-coated or galvanized for rust resistance.
• — Fits posts up to 2-3/4″ width, works on any post material.
• — No power, no fuel, no maintenance. Manual and portable.

5. How to install

Step by step: 1. Mark the post position. 2. Stand the post on the ground by hand. 3. Slide the driver over the top of the post. 4. Keep the post vertical. 5. Lift the driver and slam it down hard, forcing the post into the soil. 6. Every few impacts, check the post is still vertical and rotate the driver slightly.

Depth rule: Drive the post at least one-third of its length into the ground (e.g. 18″ deep for a 5 ft T-post, 24″ deep for a 6-10 ft post). Always wear gloves.